Should You Fit Your Own Sink?

A lot of people decide to install their own sink rather than employing someone else to do it for them. Should you attempt it? The truth is – it all depends on you.

 

 

If you have some basic knowledge about plumbing and feel confident in doing so, then by all means go ahead. If you don’t have a clue where to begin, then hire someone else. Yes, it may be appealing to install it yourself in order to save money, but you could end up costing yourself way more in the long run. It’s better to borrow the money now from the likes of getcash.com then it is to install it yourself, cause a huge mess, and end up needing way more money.

 

If you consider yourself to be an experienced do-it-yourselfer, you will hopefully find the installation of a sink to be a pretty easy job. Find a weekend when you’re free and do it then. Of course, there is a wide variety of bathroom sinks available nowadays and the type of sink you have chosen plays a crucial role in how it is going to be installed. These are explained at kitchencabinetkings.com. Some sinks will sit on the top of a counter, others have a lip that rises above the countertop – known as self-rimming sinks, whilst others are ready to install directly at the wall or floor, such as pedestal sinks. Knowing a bit more about each sink will help you to determine whether this is something you feel comfortable installing or not…

 

Self-rimming sinks are one of the easiest to install in kitchens and bathrooms. You will need to begin by making a cut-out in the countertop for the bowl. This is a simple job, seen as most of these sinks come with a template for you to do so. After that, it’s just a case of sealing the drain assembly and tailpiece and then installing the faucet if you haven’t already done so. Above-counter sinks are installed in a much similar way, with the main difference being the cut-out is a lot smaller.

 

Under-mount sinks are just as easy to install as the two mentioned and can be done so with any kind of counter. All you have to do is place the countertop upside down, apply silicone caulk around the edge of the bowl, position the bowl and secure it with screws. You can then turn the countertop over and attach it to the cabinet. Finish by hooking up the drain and supply lines.

 

Finally, wall mounted sinks and pedestal sinks require a bit of extra support. To achieve this, you should install blocking between the wall studs. When it comes to pedestal sinks, you will usually need to give extra support to the bowl by tying it to the wall with a bracket. A lot of this comes down to determining how much support your sink needs – based on its weight and size. Nonetheless, you will get instructions to assist you with this.

 

Leave A Comment

Your email address will not be published. Required fields are marked *